Platform

Snmp MIB-2

Admin packs are the centralised polling configuration downloaded by each Gemmb platform. They describe how pollers and agents monitor vendors and technologies, and are maintained and continuously updated by Gemmb.

Version 70

← All admin packs
Snmp Vendor Products5Snmp Trap Profiles19Snmp Polling Groups8Snmp Entity Definitions9Snmp Discovery Tables44Snmp Polling Actions40Statistics Tables19Chart Data Series23Statistics Charts10

Vendor products5

Snmp MIB-2 BGPv4Snmp MIB-2 InterfacesSnmp MIB-2 Managed Objects for BridgesSnmp MIB-2 OSPF v2Snmp MIB-2 Printer v2

SNMP polling40

BGP Monitoring1 actions

  • State

    BGP Peer State

    BGP Peer

Generic Printer Monitoring16 actions

  • Alert Status

    Printer System

  • Door Status

    Printer System

  • Health

    Printer System

  • Input

    Printer System

  • Input Status

    Printer Input

  • Life Count

    Printer Marker

  • Marker Supply

    Printer System

  • Output

    Printer System

  • Paper Status

    Printer System

  • Power On Count

    Printer Marker

  • Printer Maintenance

    Printer System

  • State

    Printer Channels

  • Status

    Printer System

  • Toner Level

    Printer Marker Supplies

  • Toner Level Threshold

    Printer Marker Supplies

  • Toner Status

    Printer System

Interface Health Monitoring4 actions

  • ifInDiscards

    Interface

  • ifInErrors

    Interface

  • ifOutDiscards

    Interface

  • ifOutErrors

    Interface

Interface Packet Monitoring6 actions

  • ifInBroadcastPkts

    Interface

  • ifInMulticastPkts

    Interface

  • ifInUcastPkts

    Interface

  • ifOutBroadcastPkts

    Interface

  • ifOutMulticastPkts

    Interface

  • ifOutUcastPkts

    Interface

Interface State Monitoring2 actions

  • Ethernet Speed

    Interface

  • ifState

    Interface State

    Interface

Interface Threshold Monitoring4 actions

  • Egress Falling Threshold

    Interface

  • Egress Thresholding

    ifOutOctets

    Interface

  • Ingress Falling Threshold

    Interface

  • Ingress Thresholding

    ifInOctets

    Interface

Interface Utilization Monitoring6 actions

  • ifInOctets

    Interface

  • ifOutOctets

    Interface

  • Incoming

    Isdn

  • InConnected

    Isdn

  • Outgoing

    Isdn

  • OutConnected

    Isdn

Ospf Monitoring1 actions

  • State

    Ospf Neighbor State

    Ospf Neighbor

Entities9

  • BGP Peer

    Routing

  • Interface

    Interface

  • Isdn

    Voice

  • Ospf Neighbor

    Routing

  • Printer Channels

    Printer Channels

  • Printer Input

    Printer Input

  • Printer Marker

    Printer Marker

  • Printer Marker Supplies

    Printer Marker Supplies

  • Printer System

    Printer System

SNMP trap profiles19

  • Bridge New Root

    The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree

    1.3.6.1.2.1.17.0.1

  • Bridge Topology Change Notification

    A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state.

    1.3.6.1.2.1.17.0.2

  • Cold Start

    Generic Cold Start Trap

    1.3.6.1.6.3.1.1.5.1

  • entConfigChange

    An entConfigChange notification is generated when the value

    1.3.6.1.2.1.47.2.0.1

  • Frame Relay

    This trap indicates that the indicated Virtual Circuit has changed state

    1.3.6.1.2.1.10.32.0.1

  • mteTriggerFalling

    Notification that the falling threshold was met for triggers with mteTriggerType 'threshold

    1.3.6.1.2.1.88.2.0.3

  • mteTriggerFired

    Notification that the trigger indicated by the object instances has fired, for triggers with mteTriggerType

    1.3.6.1.2.1.88.2.0.1

  • mteTriggerRising

    Notification that the rising threshold was met for triggers with mteTriggerType 'threshold'."

    1.3.6.1.2.1.88.2.0.2

  • ospfIfStateChange

    An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface.

    1.3.6.1.2.1.14.16.2.16

  • ospfNbrStateChange

    An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor.

    1.3.6.1.2.1.14.16.2.2

  • ospfVirtNbrStateChange

    An ospfVirtNbrStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor

    1.3.6.1.2.1.14.16.2.3

  • pimNeighborLoss

    A pimNeighborLoss trap signifies the loss of an adjacency with a neighbor.

    1.3.6.1.3.61.1.0.1

  • RMON fallingAlarm

    The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.

    1.3.6.1.2.1.16.0.2

  • RMON risingAlarm

    The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.

    1.3.6.1.2.1.16.0.1

  • RSVP Lost Flow

    The lostFlow trap indicates that the originating system has removed a flow from its classifier

    1.3.6.1.2.1.51.3.0.2

  • RSVP New Flow

    The newFlow trap indicates that the originating system has installed a new flow in its classifier

    1.3.6.1.2.1.51.3.0.1

  • vrrpTrapAuthFailure

    A vrrpAuthFailure trap signifies that a packet has been received from a router whose authentication key or authentication type conflicts with this router's

    1.3.6.1.2.1.68.0.2

  • vrrpTrapNewMaster

    The newMaster trap indicates that the sending agent has transitioned to 'Master' state."

    1.3.6.1.2.1.68.0.1

  • Warm Start

    Generic Warm Start

    1.3.6.1.6.3.1.1.5.2

Statistics charts10

  • Life Page Count

  • Power On Page Count

  • Toner Level

  • Interface Errors

  • Interface Packets

  • Total Bytes

  • Interface Traffic

  • Interface Utilization

  • Calls

  • Calls Connected

SNMP discovery tables44

SNMP discovery tables (44)

  • bgpPeerAdminStatus

    The desired state of the BGP connection.

    1.3.6.1.2.1.15.3.1.3

  • bgpPeerIdentifier

    The BGP Identifier of this entry's BGP Peer.

    1.3.6.1.2.1.15.3.1.1

  • bgpPeerLocalAddr

    The local IP address of this entry's BGP connection.

    1.3.6.1.2.1.15.3.1.5

  • bgpPeerRemoteAddr

    The remote IP address of this entry's BGP peer.

    1.3.6.1.2.1.15.3.1.7

  • bgpPeerRemoteAs

    The remote autonomous system number.

    1.3.6.1.2.1.15.3.1.9

  • cbgpPeerAcceptedPrefixes

    Cisco BGP Number of accepted route prefix on this connection

    1.3.6.1.4.1.9.9.187.1.2.4.1.1

  • dot3StatsDuplexStatus

    The interface operating duplex mode is reflected in this object.

    1.3.6.1.2.1.10.7.2.1.19

  • hrDeviceDescr

    A textual description of this device, including the device's manufacturer and revision.

    1.3.6.1.2.1.25.3.2.1.3

  • hrDeviceType

    An indication of the type of device. `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry exists in the hrProcessorTable

    1.3.6.1.2.1.25.3.2.1.2

  • ifAdminStatus

    interfaces : ifTable : ifAdminStatus

    1.3.6.1.2.1.2.2.1.7

  • ifAlias

    ifMIB : ifXTable : ifAlias

    1.3.6.1.2.1.31.1.1.1.18

  • ifDescr

    interfaces : ifTable : ifDescr

    1.3.6.1.2.1.2.2.1.2

  • ifHCInOctets

    The total number of octets received on the interface.

    1.3.6.1.2.1.31.1.1.1.6

  • ifHighSpeed

    ifMIB : ifXTable : ifHighSpeed

    1.3.6.1.2.1.31.1.1.1.15

  • ifIndex

    interfaces : ifTable : ifIndex

    1.3.6.1.2.1.2.2.1.1

  • ifMtu

    interfaces : ifTable : ifMtu

    1.3.6.1.2.1.2.2.1.4

  • ifName

    ifMIB : ifXTable : ifName

    1.3.6.1.2.1.31.1.1.1.1

  • ifOperStatus

    interfaces : ifTable : ifOperStatus

    1.3.6.1.2.1.2.2.1.8

  • ifPhysAddress

    interfaces : ifTable : ifPhysAddress

    1.3.6.1.2.1.2.2.1.6

  • ifSpeed

    interfaces : ifTable : ifSpeed

    1.3.6.1.2.1.2.2.1.5

  • ifType

    interfaces : ifTable : ifType

    1.3.6.1.2.1.2.2.1.3

  • ipAdEntAddr

    ip : ipAddrTable : ipAdEntAddr

    1.3.6.1.2.1.4.20.1.1

  • ipAdEntBcastAddr

    ip : ipAddrTable : ipAdEntBcastAddr

    1.3.6.1.2.1.4.20.1.4

  • ipAdEntIfIndex

    ip : ipAddrTable : ipAdEntIfIndex

    1.3.6.1.2.1.4.20.1.2

  • ipAdEntNetMask

    ip : ipAddrTable : ipAdEntNetMask

    1.3.6.1.2.1.4.20.1.3

  • isdnSignalingBchannelCount

    The total number of B channels (bearer channels) managed by this signaling channel

    1.3.6.1.2.1.10.20.1.3.2.1.6

  • isdnSignalingIfIndex

    The ifIndex value of the interface that is associated with this signaling channel

    1.3.6.1.2.1.10.20.1.3.2.1.2

  • isdnSignalingProtocol

    Isdn protocol type to which this signaling channel is connected

    1.3.6.1.2.1.10.20.1.3.2.1.3

  • lldpRemPortId

    LLDP Remote Port ID

    1.0.8802.1.1.2.1.4.1.1.7

  • lldpRemSysName

    LLDP Remote System Name

    1.0.8802.1.1.2.1.4.1.1.9

  • mplsVpnInterfaceLabelEdgeType

    mplsVpnMIB : mplsVpnInterfaceConfTable : mplsVpnInterfaceLabelEdgeType

    1.3.6.1.3.118.1.2.1.1.2

  • mplsVpnVrfOperStatus

    mplsVpnMIB : mplsVpnInterfaceConfTable : mplsVpnVrfOperStatus

    1.3.6.1.3.118.1.2.2.1.5

  • mplsVpnVrfRouteDistinguisher

    mplsVpnMIB : mplsVpnInterfaceConfTable : mplsVpnVrfRouteDistinguisher

    1.3.6.1.3.118.1.2.2.1.3

  • ospfIfIpAddress

    IP address of OSPF interface

    1.3.6.1.2.1.14.7.1.1

  • ospfNbrIpAddr

    OSPF Neighbor IP Address

    1.3.6.1.2.1.14.10.1.1

  • ospfNbrRtrId

    OSPF Neighbor Router ID

    1.3.6.1.2.1.14.10.1.3

  • prtChannelType

    The type of this print data channel.

    1.3.6.1.2.1.43.14.1.1.2

  • prtInputModel

    The model name of this input sub-unit.

    1.3.6.1.2.1.43.8.2.1.15

  • prtInputName

    The name assigned to this input sub-unit.

    1.3.6.1.2.1.43.8.2.1.13

  • prtInputSerialNumber

    The serial number assigned to this input sub-unit.

    1.3.6.1.2.1.43.8.2.1.17

  • prtMarkerColorantValue

    The name of the color of this colorant using standardized string names from ISO 10175 (DPA) and ISO 10180 (SPDL)

    1.3.6.1.2.1.43.12.1.1.4

  • prtMarkerMarkTech

    The type of marking technology used for this marking sub-unit.

    1.3.6.1.2.1.43.10.2.1.2

  • prtMarkerSuppliesColorantIndex

    The value of prtMarkerColorantIndex corresponding to the colorant with which this marker supply sub-unit is associated.

    1.3.6.1.2.1.43.11.1.1.3

  • prtMarkerSuppliesType

    The type of this supply.

    1.3.6.1.2.1.43.11.1.1.5

See the full capability list

The platform is continuously evolving. Browse features, monitoring coverage, or request a conversation.

Feature listContact